|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 * Pletronics LV96/LV98 Series is a quartz crystal controlled precision square wave generator with an LVDS output. * Solder pad compatible legacy LVDS oscillator solutions. * FR4 base using the LV93 or LV99 5x7 mm ceramic packaged SMD device. * Tape and Reel packaging is available. * 10.9 to 670 MHZ * Enable/Disable Function: LV98 on pad 2 LV96 on pad 1 * Low Jitter This series, LV96 and LV98, is not recommended for new designs. Use LV93 or LV99 series for new designs . Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB's, PBDE's Weight of the Device: 0.40 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter VCC Supply Voltage Vi Vo Input Voltage Output Voltage Unit -0.5V to +6.5V -0.5V to VCC + 0.5V -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 40 to 80oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright (c) 2008, Pletronics Inc. LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 Part Number: LV9x 45 D E V -125.0M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHZ Supply Voltage VCC V = 3.3V _ 10% + Temperature Range blank = -10 to +70oC E = -40 to +85oC Series Model Frequency Stability 45 = _ 50 ppm + 44 = + 25 ppm _ 20 = + 20 ppm _ Series Model (x is 6 or 8) Part Marking: PLE LV9x FF.FFF M C YMDXX Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 7 2007 A JAN 2 2 E 14 U 26 8 2008 B FEB 3 3 F 15 V 27 9 2009 C MAR 4 4 G 16 W 28 Marking Legend: PLE = Pletronics X = 6 or 8 FF.FFF M = Frequency in MHZ YMD = Date of Manufacture (year-month-day) All other marking is internal factory codes 0 2010 D APR E MAY 5 5 H 17 X 29 1 2011 F JUN 6 6 J 18 Y 30 G JUL 7 7 K 19 Z 31 2 2012 H AUG 8 8 L 20 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 www.pletronics.com 425-776-1880 2 LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 Electrical Specification for 3.30V _10% over the specified temperature range and the + frequency range of 10.9 MHz to 670 MHz Item Frequency Accuracy "45" "44" "20" Output Waveform Output High Level Output Low Level Differential Output (VOD) Output Offset Voltage (VOS) Differential Output Error (dVOS) Output Symmetry Output TRISE and TFALL Jitter Min -50 -25 -20 Max +50 +25 +20 LVDS Unit ppm Condition For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures -0.90 250 1.125 -47 150 - 1.60 -450 1.375 50 53 230 0.6 2.8 -20 80 0.8 +20 +20 10 10 5 +70 +85 +125 Volts Volts mVolts Volts mVolts % pS pS RMS Referenced to 50% of amplitude or crossing point Vth is 20% and 80% of waveform Measured from 12KHz to 20MHz from Fnominal Measured from 10Hz to 20MHz from Fnominal mA mA Kohm Volts Volts uA uA nS nS mS o o o See load circuit R1 = 50 ohms Output Short Circuit Current Vcc Supply Current Enable/Disable Internal Pull-up V disable V enable Output leakage VOUT = VCC VOUT = 0V Enable Disable time Start up time Operating Temperature Range 50 2.0 -20 -20 -10 -40 Vout = 0.0V To Vcc (equivalent resistance) Referenced to Ground Referenced to Ground Pad 1 low, device disabled Time for output to reach a logic state Time for output to reach a high Z state Measured from the time Vcc = 3.0V Standard Temperature Range Extended Temperature Range "E" Option C C C Storage Temperature Range -55 Specifications with E/D open circuit or connected to VCC www.pletronics.com 425-776-1880 3 LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 Typical Phase-Noise Response 0 -20 -40 dBc/Hz -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 100MHz dBc/Hz 400MHz dBc/Hz Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh 80% 50% 20% Vlow Trise Tfall Out Out* Showing Out Measurement only www.pletronics.com 425-776-1880 4 LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A ESD Rating Model Human Body Model Charged Device Model Minimum Voltage 1500 1000 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII (The part number will show as LV96xx or LV98xx) Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial Layout and application information For Optimum Jitter Performance, Pletronics recommends: * a ground plane under the device * no large transient signals (both current and voltage) should be routed under the device * do not layout near a large magnetic field such as a high frequency switching power supply * do not place near piezoelectric buzzers or mechanical fans. As much ground plane and thermal paths that can be realized under and to the side of the part is desired. www.pletronics.com 425-776-1880 5 LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 Mechanical: 1 Inches B C 0.356 +0.005 _ 0.126 +0.005 _ 0.324 +0.005 _ 0.050 0.040 0.059 0.020 0.040 0.100 0.062 mm 9.04 +0.13 _ 3.21 +0.13 _ 8.23 +0.13 _ 1.27 1.02 1.50 0.51 1.02 2.54 1.57 FR4 PCB Base: Solder masked Label: laser marked lettering All via holes tented on bottom Copper Clad 670 inch (17 m) Nickel plated 118 inch (3 m) Gold plated 0.8 inch (0.02 m) Typical thicknesses Pin 3 Ground plane is typical Not to scale 6 5 4 2 3 D F1 G 1 H1 I1 J1 K1 L1 LV98 Pad 2 LV96 Pad 1 Function Note Output When this pad is not connected the oscillator shall operate. This is not a Enable/Disable recommended condition!!!!!! When this pad is <0.80 volts, the output will be inhibited (High impedance state) Recommend connecting this pad to VCC if the oscillator is to be always on. No function Ground (GND) Output Output* The outputs must be terminated, 100 ohms between the outputs is the ideal termination. Capacitor coupled terminations can be used. Recommend connecting this pad to ground. The is internal connection. 1 3 4 5 6 2 Supply Voltage Recommend connecting appropriate power supply bypass capacitors as close as (VCC) possible. www.pletronics.com 425-776-1880 6 LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 Reflow Cycle (typical for lead free processing) Temperature (C) 250 200 150 100 175C10C 245C Maximum 10 Seconds Maximum 215C10C 120 to 160 Seconds Approximately 50 Seconds Allowed rate of temperature change Maximum 4C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 1000 per reel Constant Dimensions Table 1 Tape Size 8mm 12mm 16mm 24mm 1.5 +0.1 -0.0 D0 D1 Min 1.0 1.5 1.5 1.5 1.75 _0.1 + 4.0 0.6 _0.1 + 2.0 _0.1 + 0.6 0.1 E1 P0 P2 S1 Min T Max T1 Max 2.0 _ +0.05 Variable Dimensions Table 2 Tape Size 24 mm B1 Max 12.1 E2 Min F P1 T2 Max 8.0 W Max 16.3 Ao, Bo & Ko Note 1 Not to scale 14.25 7.5 _0.1 + 16.0 +0.1 _ Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm REEL DIMENSIONS A inches mm B inches mm C D mm mm --7.0 177.8 2.50 63.5 10.0 254.0 4.00 101.6 13.0 +0.5 / -0.2 --24.4 +2.0 -0.0 24.0 13.0 330.2 3.75 95.3 Tape Width Reel dimensions may vary from the above www.pletronics.com 425-776-1880 7 LV96/LV98 Series 3.3 V LVDS Clock Oscillators January 2008 IMPORTANT NOTICE Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice. Customers are responsible for obtaining the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to PLE's terms and conditions of sale supplied at the time of order acknowledgment. PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with PLE's limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of each product is not necessarily performed. PLE assumes no liability for application assistance or customer product design. Customers are responsible for their products and applications using PLE components. To minimize the risks associated with the customer products and applications, customers should provide adequate design and operating safeguards. PLE products are not designed, intended, authorized or warranted to be suitable for use in life support applications, devices or systems or other critical applications that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE. PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent right, copyright, artwork or other intellectual property right relating to any combination, machine or process which PLE product or services are used. Information published by PLE regarding third-party products or services does not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from PLE under the patents or other intellectual property of PLE. Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such altered documents. Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that product or service voids all express and implied warranties for the associated PLE product or service and is an unfair or deceptive business practice. PLE is not responsible for any such statements. Contacting Pletronics Inc. Pletronics Inc. Tel: 425-776-1880 th Fax: 425-776-2760 19013 36 Ave. West Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com URL: www.pletronics.com Copyright (c) 2008, Pletronics Inc. www.pletronics.com 425-776-1880 8 |
Price & Availability of LV9144DV-1250M |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |